Category Archives: Beach

CT Moonshine Dezinez Gloria Blue

Published by:

CT Moonshine Dezinez – Blue Gloria

Scrap Kit: Designer – Moonshine Dezinez Kit: Gloria Blue (Exclusive to Hania’s Designs)   Available Here

Tube: Gloria Artist: ©Alehandra Vanhek   Available Here

Both are available at Hania’s Designs
This is great kit for all of your summer tags. Whether the theme is beach/vacation/summer and or tropical.
Kit has 3 frames, 60 Elements, and 10 papers

I try to write my tutorials as plain and clear as possible, but if I get you confused (and, if I do, I am sorry) you can always refer back to the image we are making for reference. Also, this is just a guideline (I write where I place the elements ) but, feel free to move them around, or add different elements. Have fun and experiment, it is the best way to learn new things.

This tutorial was written by me on 07/08/2017 and is purely of my own making. If there is any resemblance to any other tut it is purely coincidental. Please do not claim as your own.

Please refer to my TOU on the left sidebar.

Legend

C/P = Copy Paste / D/S = Drop Shadow default settings: 4 2 10 50 Black bg: background, / S/F/D: Select All, Float, Defloat / E or el: Element R: Resize / Unsharp mask Settings: 3 30 3 (Use after resizing if the image looks grainy or blurry )

Plug-Ins : Xero (Porcelain and Clarity) and Carolaine and Sensibility (CS_LDot)
Both are Available Here
Font: Manic Sea
Mask of choice. I used a mask by Rachel’s Designs: MaskSet121_Mask1 which is Available Here

Tutorial Instruction

  • New 800 X 800
  • C/P Frame 01 R – 72% properties link set 1
  • With magic wand choose the area inside the frame and the areas of the bow that are within the frame – expand by 4
  • New Layer link set 1 C/P pp 10 as new layer drag below frame layer – paste into selection
  • C/P tube – link set 2 if using the same one I am R 50% You will need to move the frame paper layer down on the canvas so the tube is not off the canvas
  • Duplicate frame layer – move copy below frame layer Add d/s to this layer only
  • On top frame layer with eraser tool remove the part of the frame over the tubes face / upper torso once the tube is positioned where you want it : properties link set 1
  • Duplicate tube On duplicated tube layer: Adjust blur – Guassion blur settings 4
  • Back on duplicated tube layer plug in Xero Porcelain default settings except change blue slider to 0 – now apply Xero- Clarity default settings Apply D/S to this layer only
  • Back on top tube layer change blend mode to soft light. If you would like a lighter tube use screen or a darker blend use multiply (I used screen)
  • C/P E 2 drag below tube layer place so that some of the fronds are outside the frame – you may need to erase some of the top frame layer – I erased a small part so that the top frond looks as if it is above the frame layer
  • Working on top layer C/P E25 R 35% place to lower left
  • C/P E52 R 50% image – mirror horizontal
  • C/P e 56 R 50% x2 place lower right C/P E56 R 30% place lower left
  • C/P E 21 R 40% place lower left move behind flowers
  • C/P E 33 R 30% place lower right should be on layer below flowers if not move below flowers
  • C/P E15 R 25% move lower left
  • back on top layer C/P E35 R 30% place to lower left
  • C/p E32 R 50% X 3 place lower left
  • C/p E 38 Mirror Horizontal Apply D/s changing the black to #355b5f Move dirctly above bottom frame. Effects – Edge Effects – Enhance
  • C/P E11 R 40% Apply same D/S as above
  • Resize all – pixels Canvas size 650 X 650
  • Merge Visible R 95% All Layers unchecked
  • New layer move under image flood fill white
  • New layer select all C/P Pp1into selection – deselect
  • Apply Mask of choice I used Rachel’s Designs MaskSet121-mask1 Close white layer
  • Apply your license and copyright info
  • Add name save as pspimage I used font Manic Sea 20 pts applied Carolaine and sensibility filter – CS Ldots, Inner Bevel and soft white gradient glow.
  • Export save as PNG and you are done.

Thank you for trying my tutorial.

PTU Tutorial At the Beach

Published by:

New CT Tutorial for Digi Divas

CT PTU Tutorial for Digi Divas – Scrap Kit Seaside Beauty by Jenns Designs

This tutorial was written by me (Marie’s Designs) on June 22, 2016.
This is purely my creation and any resemblance to any other tutorial is coincidental.

Tube: © Alehandra Vanhek Scrap Kit: At the Beach by Tagcatz Design
Available here Available here

Jane is a gorgeous new summer tube from © Alehandra Vanhek – she comes with several layers of bikini colors, bikini wrap, jewelry and flower all on seperate layers.

The scrap kit At the Beach by Tagcatz is an absolutely fabulous kit. Summer tagging fun with At The Beach – 96 elements and 8 papers. Not all shown. Tagger size. PU only. Drop shadows on preview only. Both are available at Digi Divas.

Tube is Available here

Scrap kit is Available here

Supplies
I used 2 masks from Rachel’s Designs Maskset1-1 and Mask 83-2
they are available here
Filter Xero: porcelain Plug-in is available here

At the Beach

Legend:

C/P Copy Paste / ~ D/S Drop Shadow default setting: 3 -3 58 7.92 / bg: background/ S/F/D: Select All, Float, Defloat / E or el: Element / R: Resize / Unsharp mask Settings: 3 30 3 (Use after resizing if the image looks grainy or blurry

I try to write my tutorials as plain and clear as possible, but if I get you confused (and, if I do, I am sorry) you can always refer back to the image we are making for reference. Also, this is just a guideline (I write where I place the elements ) but, feel free to move them around, or add different elements. Have fun and experiment, it is the best way to learn new things.

Small Frame inside frame Instructions

  • New Image 700 x 700
  • C/P el 55 R 82%
  • C/P El 25 R 82% X 2
  • C/P el51
  • Click inside bottom frame (The blue one) Select modify expand 5
  • New Layer C/ P pp1 into selection
  • Keep Selected
  • C/P tube R 80% move down until you have the face where you want it
  • On tube layer invert clear deselect
  • tube change blend mode to multiply
  • duplicate change blend mode to screen
  • save this image as a psp if you want to, be sure to remember your copyright info
  • Copy merged –

Tutorial Instructions

  • New image 700 X 700 FF white
  • C/P merged frame image close for now
  • New layer Select All C/P pp 5
  • Mask RD Maskset1-1 Merge group
  • Select All new layer C/P pp 4 into selection – deselect
  • Apply mask RD Maskset 83-2 merge group
  • Select All C/P pp 7 as new layer – apply same mask to this layer
  • Merge group – mirror
  • C/P el 2
  • C/P E 30 move to bottom of masked image – duplicate Flip
  • C/P E 29 Free rotate L 90 all layers unchecked move to left – duplicate flip
  • Duplicate again and mirror. Duplicate flip
  • C/P el 60 R 50%
  • The following elements will be placed in or under the frame so please start at raster 3 – which should be el 2 (wheel, waterdrop splash)
  • C/P el 69 R 68% move to bottom right. Duplicate Mirror On mirrored image free rotate R 38.20 Move over bamboo
  • C/P el 83 R 68% X 2
  • C/P el 36 R 68% X 2 Move behind seagull
  • C/P El 31 R 45% place in center of canvas
  • Close white background layer merge visible R 85%
  • Duplicate move down and to the left
  • C/P tube R 32 % move to far left of duplicated frame – with your selection tool draw a rectangle over the part of the tube within the frame – invert delete. deselect
  • Duplicate tube – change blend mode to screen or whatever you like best
  • Merge down R this frame 90%
  • Now we will start adding el above the bamboo frame
  • Open up your framed tube image that we closed at the beginning of this tutorial
  • arrange layer bring to top R 50%
  • move to right lower corner of bamboo frame
  • C/P el 69 R 80% Free rotate L 38.20 place between frames at bottom
  • C/P el 11 R 80% move to right
  • C/P el 15 R 52% move in front of and to left of surfboard
  • C/P tube R 40% Mirror
  • Duplicate X 2 on 2nd layer change blend mode to screen on the top layer Change Blend mode to Multiply add guassian blur 3 – xero – porcelain default settings changing the blue slider to 0
  • If you want a softer look swap the multiply and screen blend mode
  • On the 2nd tube layer – merge down – top tube layer merge down. Now all 3 copies should be on one layer
  • C/P el 4 R 68% x 2 Place at base of surfboard
  • Duplicate Mirror
  • Duplicate again Effects – Image effects Offset setting H 220 V 0
  • Move under dog layer
  • C/P el 77 R 68% mirror
  • C/P el 1 R 50% X 2 duplicate – place one behind right of the dogs. Place other one below and to right of tube layer
  • C/P el 74 R 50% placebetween palms
  • C/P el 23 R 45% move to left in front of tube duplicate mirror place in front of palm frond at the top right of frame
  • C/P el 5 duplicate R 1 of them 50% X 2 and the other 45% X 2 move one to the left mirror the other one and place on right
  • C/P el 64 R 62% move center right
  • C/P El 71 move to bottom
  • Resize now if you want to , close or delete white background layer
  • Close the wordart layer
  • Merge visible R 98% X 2
  • Open wordart layer R 95% X 2
  • Add your copyright info and license number
  • If you want to save it for future use or to make for other people, save as a pspimage
  • Add your name Export – png optimizer and save. you are done

The font I used is called Secrets of the Octopus

Thank you for trying my tutorial I hope that you have enjoyed it. Marie

My facebook fan page

PTU Tutorial Seaside Beach

Published by:

CT Tutorial Digi Divas

CT PTU Tutorial for Digi Divas – Scrap Kit Seaside Beauty by Jenns Designs

This tutorial was written by me (Marie’s Designs) on June 20, 2016.
This is purely my creation and any resemblance to any other tutorial is coincidental.
Masks used: (Rachel Designs: MaskSet16_Mask 1 and 2)
Available here

Filter – Funhouse: Mirror Moire
available here

Font used Fanatic Lite
Available here

Tube used is available at Pics for Design (Dolphin Girl ) ©Laguna.
You must have a license and have purchased this tube in order to use it for this tutorial.

Scrap Kit: Seaside Beauty By Jenn’s Designs.
This kit is contains 50 seaside/beach Elements ,10 Papers, and a Tube (Chibi Mermaid) Included, Personal Use Only. Please do not share.
Kit is available at Digi Divas here.

Tutorial Instructions – Seaside Beauty

Legend:

C/P Copy Paste / ~ D/S Drop Shadow default setting: 3 -3 58 7.92 / bg: background/ S/F/D: Select All, Float, Defloat / E or el: Element / R: Resize / Unsharp mask Settings: 3 30 3 (Use after resizing if the image looks grainy or blurry

I try to write my tutorials as plain and clear as possible, but if I get you confused (and, if I do, I am sorry) you can always refer back to the image we are making for reference. Also, this is just a guideline (I write where I place the elements ) but, feel free to move them around, or add different elements. Have fun and experiment, it is the best way to learn new things.

  • New Image 700 X 700 FF white
  • Select All C/P pp 1 as new layer – crop to selection
  • Apply Filter Funhouse Mirror Moire with these settings: 15, repeat change to 65
  • Effects – Edge Effects – Enhance
  • Apply MoireMirror filter again changing to 116
  • Duplicate Mirror On duplicated layer change blend mode to multiply
  • On duplicated layer apply mask RD_MaskSet116_Mask1 Merge Group
  • On original paper layer Apply Mask RDMask_maskset116_Mask2
  • Merge Group
  • Merge Down
  • C/P E 21 move to center of canvas then down a little bit (Do not add a D/S to this layer)
  • C/P E 36 Place midway of grass layer (Do not add a D/S to this layer)
  • C/P E 4 R 52% move to upper right (Do not add a D/S to this layer)
  • C/P E 50 R 52% move to center right Duplicate Mirror
  • C/P E 13 R 72% You may need to move the flowers we just placed so they are partially under the frame.
  • C/P E 25 Move down
  • C/P E 10 R 68% move to right lower area of frame
  • C/P E 6 R 52% Free rotate all layers unchecked R 28.52 Move to right over grass
  • C/P E 1 Duplicate R 68% mirror move under grass. the other fish R 82% move to left center
  • C/P Dolphin from tube (if not using the same tube) or Chibi (E 26)
  • Instructions will be for Chibi but if using the dolphin R 32% then R 85%
  • C/P E 26 R 82% X 2 then R 92% place so that you can see the fish behind her
  • With the larger of the 2 fish Anchor 1 – then duplicate move duplicated fish above the mermaid
  • Erase the back part of the duplicated fish – so the fish looks as if it is swimming over mermaid tail
  • C/P E 27 R 62% move at top of mermaid C/P again R 72% move near bottle
  • E 24 (will use this element two more times) place at top of water / sand layer
  • E 9 R 72% move over sand
  • E24 place to right of water under bottle
  • E12 R 78% move to left of frame
  • Apply Funhouse MoireMirror Filter setting at 8 – then repeat
  • C/P E 23 R 62% – move to left
  • E 42 R 62% move to right beneath the 2nd wave layer
  • C/P E 38 move down until the bottom area of plant
  • Back on top layer C/P Tube (If you are using the one I am R 32% then 92% Mirror – move to left ) If using a different tube resize to fit your canvas
  • C/P E 24 (waves ) Move in front center at tip of water
  • C/P E 28 resize 60% duplicate move down below tube layer – place in front of cattails
  • Back on top layer – C/P E 28 R 60% then 80% place to the left of the tube
  • C/P E 18 R 50% move to left Duplicate Mirror R 80%
  • C/P E 46 R 50% move to right Duplicate R 90% mirror
  • Duplicate then R 75% mirror place above shell
  • C/P E 3 R 75% X 2 move to left under shell but above starfish
  • C/P E 2 R 50% then 75% move to right above flip flops
  • C/P E 29 place where you want it
  • C/P E 8 R 42% X 2 move to tip of starfish on the left side
  • C/P E 8 R 42% R 68% Move to right below the flip flops
  • Resize now if you want to
  • Add your license and copyright info
  • Close white bg – save a pspimage
  • Add your name – I used Fanatic Lite at 72 – Foreground: #2ad1e7 / background Gradient Foreground/Background R 0 A 0.
  • Save as PNG and you are done

Thank you for trying my tutorial. I hope that you have enjoyed it and created something beautiful

Ct Tiny TTDA Alehandra Vanhek

Published by:

~~ CT Tiny Turtle Designs Artists ~~
©Alehandra Vanhek: Kate
TTDA Kit Teddy Bear Beach
Available here
Available here

Stunning new tube by © Alehandra Vanhek – Kate. This tube comes with several layers and colors of shorts and jackets. I used the matching kit Teddybear beach designed by Tiny Turtle Designs. Kit has 119 PNG Elements (inc 9 frames) and 19 papers. Primary colors of pink and turquoise. A great kit for any girly, nautical themed tag.

The tube is available here

The scrapkit is available here


Scrap used is KISS14 Created by Dee's Sign Depot

She has fantastic scrap kits and offers original blog designs.
Page made by ©Marie Ott • All rights' reserved 2018