Tag Archives: Mizteeque

Tutorial: My Lucky Charm

Published by:

Tutorial written By Marie Ott (Maries Designs) on Feb 8, 2019.
Any resemblance or similarity to any other tutorial is coincidental. ® All rights to tutorial are mine.
You results are yours to do with as you will. Please do not copy my tutorial and claim it as your own.

This tutorial assumes that you have a working knowledge of PSP.
I used PSP X7 to write this tutorial but it should work with other version(s) of PSP as well.

Legend: C/P = Copy/Paste E = Element R = Resize S/F/D= Select All, Float, Defloat
D/S = Drop Shadow Settings: 3 -5 48 7.92
Unless otherwise stated. 
After each layer of the template has been changed, close off the original shape.
This makes it easier to go back and correct any changes you want to make

Supplies need:

  • Scrap Kit Olde Lucky by Mizteeques Digital Designs Available Here
  • Template by me: St pat temp 1 (Lucky Charm) Download Here
  • Mask by me: MD-stpatmask2-2019 Available here or mask of choice
  • Tube: Lucky Day ©Alex Prihodko Available Here
  • Font of Choice: I used Gudlack which is a PTU Font

Outside Filters used:

  • Xero: Porcelain and Clarity
  • Carolaine and sensibility: CS-LDots
  • Eye Candy 6 Gradient Glow
  • Most filters are available Here

 

Tutorial Instructions:

 

What we are making:
 

Open St PaT Template 1 (Lucky Charm)
Control + D (Duplicate)
Close original delete copyright info

On template – Image – Canvas Size 700 X 700 Center

New raster layer above white bg layer
Copy Paper 1 – Select All paste into selection
Apply mask MD-stpatmask2-2019 or a mask of choice

Working from bottom of template up:
Activate bottom square – S/F/D c/p paper 15 invert delete deactivate
activate next layer (Lt green square) S/F/D C/p Paper 16 as new layer – invert – delete deactivate
activate green oval top (If you need to change the colors of the borders under this shape please do so now) C/P paper 8 R 68% invert – delete
Activate orange square layer: S/F/D C/P Paper 3 as new layer: R 75% Free Rotate 45 degrees right invert delete
make green oval 2 layer active S/F/D c/p paper 17 as new layer R 75% place so you can see Olde Lucky at the top invert delete
Activate lge green circle – S/F/D c/p paper 16 R 50% place so you can see some of the green sparkle at the top of the paper invert delete deactivate
activate sm green circle layer S/F/D C/p Paper 15 as new layer R 75%- invert – delete deactivate

C/P frame 3 R 75% place in center of top oval shape with magic wand tool (set feather to 2) select inside the clover expand by 2
C/P tube I resized the one I used by 50% (Yours may be different depending on the tube that you are using) place face beneath the frame layer invert delete set blend layer to screen
Duplicate – adjust blur guassian blur 4 on duplicated image blend mode to overlay
C/P tube R 50% place on the layer above the top oval shape – duplicate tube
on duplicated tube layer apply guassian blur with a setting of 4 change blend mode to soft-light or whichever looks best on your tube
On the original tube layer – Apply Xero – porcelain default setting except change blue to 0
Apply Xero clarity – default settings merge down apply d/s

Activate square 2 C/P tube place face of tube within square – promote selection to layer deselect.
decrease opacity to 70% merge down – apply GG
I used Eye Candy 6 with these settings:


Or you can download and install the setting.
Download EC6 GG setting here
Open zip file and click on setting. it will automatically install to EC 6

Activate the large circle repeat above – only mirror your tube and invert and delete this time
apply luminance (l) duplicate
change blend mode on duplicate to screen opacity to 50
merge the bottom tube first – then the duplicated tube. Add GG as above
(I added the gradient glow to the square and circle layers)

C/P E 13 R 60% place at bottom of center to the right – duplicate mirror move up a bit
C/P E 57 R 50% move to right side below the LUCKY wordart duplicate R 50% mirror
place above the end of the rainbow
C/P E 19 R 50% move behind the y of LUCKY and to the right a bit.
C/P E 16 R 50% place a little offset to the left of E 19
C/P E 8 R 50% place between two circles on the left side
Duplicate place below tube layer – behind and a little above word art
C/P E 39 R 25% move to right side behind the tube so some of the flower is visible
Duplicate Mirror move layer up and place behind the rainbow
C/P E 42 R 25% place in above the LUCKY Word art but below the Charm Layer
C/P E 50 R 20% move to lower left at end of the rainbow
place the horseshoe that is part of the template behind this horseshoe (E 50)

If you are using the wordart that came with the template this is what I did:
On the top lucky layer Apply Carolaine and Sensibilty CS-LDots default setting
Inner Bevel: Settings:
 
I added the same GG as above to the [lucky] glitter layer
close white background and mask layer – Layers Merge Visible
Resize 95% open mask layer and you are done
Resize the tag now if you want it smaller
Add your copyright info
Add your name and save as png
Thank you for trying my tutorial, Marie

4,650 total views, 58 views today

FTU Tutorial: Fab-Boo-Lous

Published by:

Fab boo lous tutorial

Tutorial: Fab-Boo-Lous

Fab boo lous tutorial

Tutorial written by Marie’s Designs Sept. 10, 2018 any similarity to any other tutorial is pure coincidence. Please do not offer my designs or tutorials on your website, blog, groups. etc. Instead, please, redirect to my blog for download. Thank you, Marie

This tutorial assumes that you have a working knowledge of PSP. I used PSP X7 to write this tutorial but it should work with other versions of PSP as well. I try to write my tutorials as plain and clear as possible, but if I get you confused (and, if I do, I am sorry) you can always refer back to the image we are making for reference. Also, this is just a guideline (I write where I place the elements ) but feel free to move them around, or add different elements. Have fun and experiment, it is the best way to learn new things.

      Legend: C/P = Copy/Paste E = Element R = Resize S/F/D= Select All, Float, Defloat
D/S = Drop Shadow Settings: 4 -4 42 9.9 Unless otherwise stated.

FTU Tutorial Supplies used/needed:

Template Fab-boo-lous by me here
Mask by Mizteeque: Mask 216 Available Here 3rd mask down
Scrap kit Miz_HallowsEve is a Taggers Inn Forum exclusive, designed by Mizteeque’s Digital Designs
You can find more of her great scrap kits here.
Plug-In used: EC 6 – Gradient Glow

Now, let’s get started with the tutorial

  • Open Template Duplicate (Shift +D) Close original
    Delete copyright layer
  • Papers used: Open 25, 31, 22, 30, 23
  • Starting on Bottom Layer
    Click on background layer Select All New raster layer
    C/P pp 30 into selection Apply mask (I used Mizteeque 263) deselect
    merge group R: 110%
  • On bottom layer (the 3 stripes) Select All F/D
    C/P pp 25 as new layer R 75% invert delete Move below the original stripes layer
    On the original stripe layer – change blend mode to Luminance (l) Opacity: 65%
    Merge Down Sharpen: Sharpen
  • Working on Orange square 2 Select All F/D new layer C/P pp 23 into selection
    Apply Gradient Glow Tiny Double
    Colors: #d5fa57, FFFFFF, #6e29bc
    Apply IB Settings: Shape 2, W: 10 Smoothness: 25 Depth: 8 Ambience : -20 Shiniess: 35 Color: #eeecec Angle 315 Intensity: 35 Elevtion: 60
    Repeat with the other Orange square
  • IB Screenshot:
    Inner Bevel Settings
    Eye Candy 6 gradient glow settings
    Eye Candy 6 GG Setting

  • On large green circle Select all F/D C/P Pp31 as new layer R 75% move it about a bit so some of the purple color shows Invert Delete Deselect
  • on the border layer for the olive square: Add noise setting: monochrome guassian 70
  • On olive square layer Select All F/D C/P pp 22 as new layer – Promote selection to layer deselect add Gradient glow as before changing the last color to: #f88b26
    now merge border layer down
  • Repeat noise for border 2 – do not merge down, tho, until after adding your paper
  • On Olive square 2 Select All F/D select pp22 move above this layer R 75%
    move paper around a bit until you like the image Selction – Invert – Delete Deselect
  • Select red square layer Select all F/D C/P pp 30 resize 75% promote selection to layer
  • Layer red square 2 Select All F/D – move paper layer above this layer. Invert selection – clear deselect
  • Add gradient glow to both squares as before changing the last color to: #34064c

Now to add some elements:

  • C/P E 64 R 62% place at bottom of canvas under the gold stars layer
  • C/P E 53 R 85% Move above the large circle layer – change blend mode to overlay – duplicate
  • on top layer C/P E 38 R 50% Move to left of open book
  • C/P E 31 R 68% Move behind open book layer
  • C/P E 30 R 50% Place to right behind skulls and up a bit so it is behind the Lous of the word art
  • Duplicate R 70% place to left of cat atop the books
  • C/P E 16 as new layer resize 50% move to left under the bat layer of the word art
  • On the word art layer the bats and witches hat as well as the black part of the wordart
  • I added the same inner bevel as above.

And This tutorial is done.

If you would like to add a tube make sure you use the correct copyright and license number if needed
One I made with a tube added:

Faboolous

Tube Owl by VeryMany available here

Now if you add a tube this is what I did with the one I used
I removed the top 2 squares (the red ones originally)
– I used a tube from Very Many: Owl
R 50% and moved above the second layer of squares.
Duplicated added guassian blur at 3, changed blend mode to soft light at 75% opacity
And Drop Shadow at 4 – 4 48 9.9

5,827 total views, 30 views today

Scrap used is KISS14 Created by Dee's Sign Depot

She has fantastic scrap kits and offers original blog designs.
Page made by ©Marie Ott • All rights' reserved 2018